The Raspberry Pi is a small, affordable single-board computer that you will use to design and develop fun and practical IoT devices while learning programming and computer hardware. In addition, you will learn how to set up up the Raspberry Pi environment, get a Linux operating system running, and write and execute some basic Python code on the Raspberry Pi. You will also learn how to use Python-based IDE (integrated development environments) for the Raspberry Pi and how to trace and debug Python code on the device. Please note that this course does not include discussion forums.
Este curso forma parte de Programa Especializado - An Introduction to Programming the Internet of Things (IOT)
The Raspberry Pi Platform and Python Programming for the Raspberry Pi
ofrecido por
Programa Especializado - An Introduction to Programming the Internet of Things (IOT)Universidad de California en Irvine
Acerca de este Curso
4.6
1,475 calificaciones
Habilidades que obtendrƔs
Computer ProgrammingPython ProgrammingInternet Of Things (IOT)Raspberry Pi
Programa - QuƩ aprenderƔs en este curso
Semana
14 horas para completar
Module 1
This module describes the basic functionality the Raspberry Pi B+ board. I'll describe how to set up the board, configure it, and use it. An important point differentiating Raspberry Pi from the Arduino platform which we have talked about previously is that Raspberry Pi uses an operating system. I'll describe some of the implications of an operating system on the behavior of the Raspberry Pi as an IoT device.
10 videos (Total 55 minutos), 4 readings, 2 quizzes
10 videos
Lecture 1.1 - Raspberry Pi Board (Updated)2m
Lecture 1.2 - Raspberry Pi Processor5m
Lecture 1.3 - Raspberry Pi vs. Arduino (Updated)7m
Lecture 2.1 - Operating System Benefits7m
Lecture 2.2 - Processes8m
Lecture 2.3 - Raspberry Pi IoT4m
Lecture 3.1 - Raspberry Pi Setup5m
Lecture 3.2 - Raspberry Pi Configuration5m
Lecture 3.3 - Overclocking (Updated)8m
4 lecturas
Pre-Course Survey10m
Course Overview10m
Module 1 Objectives10m
Module 1 Reading10m
1 ejercicio de prƔctica
Module 1 Quiz16m
Semana
23 horas para completar
Module 2
The Raspberry Pi is typically installed with a Linux-based operating system, so we present the basics of Linux and its use. We describe some of the main features including navigating the file system and managing processes. We describe the text-based user interface through the shell and we overview the graphic user interface which is the default with the Raspian Linux distribution.
10 videos (Total 44 minutos), 2 readings, 2 quizzes
10 videos
Lecture 1.1 - Linux Basics4m
Lecture 1.2 - Login2m
Lecture 1.3 - Linux Filesystem (Updated)3m
Lecture 2.1 - Navigating the Filesystem (Updated)8m
Lecture 2.2 - Text Editors (Updated)4m
Lecture 2.3 - Accessing Files4m
Lecture 3.1 - Permissions6m
Lecture 3.2 - Processes3m
Lecture 3.3 - Linux Graphic User Interface3m
2 lecturas
Module 2 Objectives10m
Module 2 Reading10m
1 ejercicio de prƔctica
Module 2 Quiz16m
Semana
33 horas para completar
Module 3
We present the basics of the Python programming language to prepare you for programming on the Raspberry Pi. Many languages can be used but Python is the most convenient for the Raspberry Pi because convenient APIs are provided for basic operations such as controlling the pins. Python is a powerful language with useful features that we will present so that you can use these features to control the Raspberry Pi.
10 videos (Total 45 minutos), 2 readings, 2 quizzes
10 videos
Lecture 1.1 - Python on Raspberry Pi7m
Lecture 1.2 - Python Programming Environment6m
Lecture 1.3 - Python Expressions3m
Lecture 2.1 - Strings6m
Lecture 2.2 - Functions4m
Lecture 2.3 - Function Arguments3m
Lecture 3.1 - Lists3m
Lecture 3.2 - List Methods3m
Lecture 3.3 - Control Flow5m
2 lecturas
Module 3 Objectives10m
Module 3 Reading10m
1 ejercicio de prƔctica
Module 3 Quiz16m
Semana
44 horas para completar
Module 4
In this module we describe how to communicate with devices through the pins of the Raspberry Pi. We examine the RPi.GPIO library which provides Python functions used to access the pins. We discuss how to set up the pins, apply digital voltages, and generate Pulse Width Modulated signals. We also describe the Tkinter Python library and show how it can be used to access pins through a graphic user interface.
10 videos (Total 52 minutos), 3 readings, 2 quizzes
10 videos
Lecture 1.1 - General Purpose IO Pins6m
Lecture 1.2 - Protocol Pins4m
Lecture 1.3 - GPIO Access4m
Lecture 2.1 - General Purpose IO Pins (Updated)4m
Lecture 2.2 - Pulse Width Modulation8m
Lecture 2.3 - Demo of a Blink5m
Lecture 3.1 - Graphic User Interface6m
Lecture 3.2 Tkinter Library3m
Lecture 3.3 - Interaction6m
3 lecturas
Module 4 Objectives10m
Module 4 Reading10m
End-of-Course Survey10m
1 ejercicio de prƔctica
Module 4 Quiz16m
22%
comenzĆ³ una nueva carrera despuĆ©s de completar estos cursos
24%
consiguiĆ³ un beneficio tangible en su carrera profesional gracias a este curso
Principales revisiones
Extremely helpful if you want to start using Raspberry Pi. Gives you the required knowledge to kickstart your Raspberry Pi learning and you get a hint of python programming as well which is useful
It was very good, all the basics about python and the raspberry pi platform. I would like if you publish a book to read about the topics, for example I have been reading the book "Think Python".
Instructor
Ian Harris
ProfessorDepartment of Computer Science
Acerca de Universidad de California en Irvine
Since 1965, the University of California, Irvine has combined the strengths of a major research university with the bounty of an incomparable Southern California location. UCIās unyielding commitment to rigorous academics, cutting-edge research, and leadership and character development makes the campus a driving force for innovation and discovery that serves our local, national and global communities in many ways.
Acerca del programa especializado An Introduction to Programming the Internet of Things (IOT)
Design, create, and deploy a fun IoT device using Arduino and Raspberry Pi platforms.
This Specialization covers embedded systems, the Raspberry Pi Platform, and the Arduino environment for building devices that can control the physical world. In the final Capstone Project, youāll apply the skills you learned by designing, building, and testing a microcontroller-based embedded system, producing a unique final project suitable for showcasing to future employers. Please note that this specialization does not offer discussion forums.
Preguntas Frecuentes
ĀæCuĆ”ndo podrĆ© acceder a las lecciones y tareas?
Una vez que te inscribes para obtener un Certificado, tendrĆ”s acceso a todos los videos, cuestionarios y tareas de programaciĆ³n (si corresponde). Las tareas calificadas por compaƱeros solo pueden enviarse y revisarse una vez que haya comenzado tu sesiĆ³n. Si eliges explorar el curso sin comprarlo, es posible que no puedas acceder a determinadas tareas.
ĀæQuĆ© recibirĆ© si me suscribo a este Programa especializado?
Cuando te inscribes en un curso, obtienes acceso a todos los cursos que forman parte del Programa especializado y te darĆ”n un Certificado cuando completes el trabajo. Se aƱadirĆ” tu Certificado electrĆ³nico a la pĆ”gina Logros. Desde allĆ, puedes imprimir tu Certificado o aƱadirlo a tu perfil de LinkedIn. Si solo quieres leer y visualizar el contenido del curso, puedes auditar el curso sin costo.
ĀæCuĆ”l es la polĆtica de reembolsos?
ĀæHay ayuda econĆ³mica disponible?
ĀæTienes mĆ”s preguntas? Visita el Centro de Ayuda al Alumno.
Coursera brinda acceso universal a la mejor educaciĆ³n del mundo, al asociarse con las mejores universidades y organizaciones, para ofrecer cursos en lĆnea.
Ā© 2019 Coursera Inc. Todos los derechos reservados.
