Chevron Left
Volver a Sensors and Sensor Circuit Design

Opiniones y comentarios de aprendices correspondientes a Sensors and Sensor Circuit Design por parte de Universidad de Colorado en Boulder

967 calificaciones

Acerca del Curso

This course can also be taken for academic credit as ECEA 5340, part of CU Boulder’s Master of Science in Electrical Engineering degree. After taking this course, you will be able to: ● Understand how to specify the proper thermal, flow, or rotary sensor for taking real-time process data. ● Implement thermal sensors into an embedded system in both hardware and software. ● Add the sensor and sensor interface into a microprocessor based development kit. ● Create hardware and firmware to process sensor signals and feed data to a microprocessor for further evaluation. ● Study sensor signal noise and apply proper hardware techniques to reduce it to acceptable levels. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers typed out, so you can copy and paste them into the Digikey web site. You will need one of each part. 428-3390-ND NHD-0216BZ-RN-YBW-ND 570-1229-ND A105970CT-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on or o Digilent 410-324 | OpenScope MZ available on Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - o SainSmart DSO212 - o PoScope Mega50 USB - o ADALM2000 -

Principales reseñas


28 de may. de 2020

This course is really tailormade and covers many aspect of sensor and sensor circuit design in minute details. The assignments and course project ensure the students engagement and learning.


16 de sep. de 2020

It was amazing experience about how the course was so professionally held .It was amazing i have learning different things right from practical to theory it absolutely brilliant.

Filtrar por:

201 - 221 de 221 revisiones para Sensors and Sensor Circuit Design

por Siddharth S

4 de nov. de 2020

its okay

por tanveer

20 de sep. de 2021


por Mohammad H k

25 de ago. de 2020


por Pan W

24 de jul. de 2020


por Kelvin R D

9 de jul. de 2020



18 de jul. de 2022

The theory is very interesting. It would have been even better with more examples, mostly for the OpAmp, on when to use what configuration. The OpAmp in small signals could be good to explore too.

Please, add the 100ohm resistor for the LCD contrast to the purchase list. And the 100nF capacitor too.

por Cesaltino G

11 de sep. de 2020

First would like to thank you for the course and for your help with everything in the course. However, there should be more consideration and valued people who take the for free which is not entirely free, quizzes could be less defficult and course would be more connected to Oil and Gas Industry.

por Akhilaparameswari k

14 de abr. de 2020

It's a very interesting and very knowledge gain able topic and had learned lot of things from this . And I would like to say thank to coursera for providing this.

por Adhithya

14 de oct. de 2020

Course is intense and instructors are very good at presenting the concepts. Quizzes were highly problematic and well structered.

por Roberto B

6 de mar. de 2021

Many operations were confusing on using nomenclature, you have to buy parts

por David M

19 de nov. de 2019

It lacks a little of info where refering to circuit wiring and API's code

por Tarun M

24 de may. de 2020

not well explained

por Mohit K

13 de abr. de 2020


por Manuel G J

10 de dic. de 2020

Theoretical videos and theoretical course materials are good. I didn't like the lab and course projects at all, since it was very confusing. It's a good summary of many interesting electronics and instrumentation components and phenomena. I invested a lot of time to wire up and set up the PSOC with all the hardware that is specified at the beginning of the course. Still had a very hard time, and there were many steps that I couldn't complete even though I was following the instruction step by step.

por Samuel C

22 de mar. de 2020

The emphasis in course material is more on granular, applied details relating to sensor specification than on theoretical concept. The graded assignments tend to emphasis many easy questions rather than a few difficult ones.

por JuanEs P J

25 de feb. de 2020

There are some interesting concepts on debugging I found really useful, I was hoping for more applications or sensor integration labs, the lab ends up being a tutorial

por Akshat S

23 de abr. de 2020


por Girish r

14 de sep. de 2020

I'm don't receive certificate that's way im not happy about this course

por Jacob A

12 de jun. de 2021

This course is very poorly organized to an embarrassing level. The list of required materials is incomplete. They don't tell you that you also need a soldering iron and header pins to accomplish the lab. The quizzes and homework questions are often poorly worded with no explanation for wrong answers. So you are left guessing yourself over and over if you got it wrong. Other questions are pointless in which you are asked to fill in the blank for a random thing the instructor said or is buried in the reading.

It feels like the instructors couldn't be bothered to put any effort into this course. Go take the in-person version.

por Manish B

7 de mar. de 2021

I'm unable to verify my ID only for your course alone. Other than everything is ok.

por amlaku y

23 de feb. de 2021

please give me the certificate