Arduino senses the environment by receiving inputs from add-on devices such as sensors, and can control the world around it by adjusting lights, motors, and other actuators. In this class you will learn how and when to use the different types of sensors and how to connect them to the Arduino. Since the external world uses continuous or analog signals and the hardware is digital you will learn how these signals are converted back-and-forth and how this must be considered as you program your device. You'll also learn about the use of Arduino-specific shields and the shields software libraries to interface with the real world. Please note that this course does not include discussion forums.
Este curso forma parte de Programa especializado: An Introduction to Programming the Internet of Things (IOT)
93.838 ya inscrito
ofrecido por
Programa especializado: An Introduction to Programming the Internet of Things (IOT)Universidad de California en IrvineAcerca de este Curso
73.163 vistas recientes
Fechas límite flexibles
Restablece las fechas límite en función de tus horarios.
Certificado para compartir
Obtén un certificado al finalizar
100 % en línea
Comienza de inmediato y aprende a tu propio ritmo.
Aprox. 11 horas para completar
Inglés (English)
Subtítulos: Árabe (Arabic), Francés (French), Portugués (europeo), Italiano, Vietnamita, Alemán (German), Ruso (Russian), Inglés (English), Español (Spanish)
Fechas límite flexibles
Restablece las fechas límite en función de tus horarios.
Certificado para compartir
Obtén un certificado al finalizar
100 % en línea
Comienza de inmediato y aprende a tu propio ritmo.
Aprox. 11 horas para completar
Inglés (English)
Subtítulos: Árabe (Arabic), Francés (French), Portugués (europeo), Italiano, Vietnamita, Alemán (German), Ruso (Russian), Inglés (English), Español (Spanish)
ofrecido por
Universidad de California en Irvine
Since 1965, the University of California, Irvine has combined the strengths of a major research university with the bounty of an incomparable Southern California location. UCI’s unyielding commitment to rigorous academics, cutting-edge research, and leadership and character development makes the campus a driving force for innovation and discovery that serves our local, national and global communities in many ways.
Programa - Qué aprenderás en este curso
3 horas para completar
Module 1
IoT devices involve a combination of software and hardware. This module provides background on the basics of hardware design and wiring needed to build useful circuits. This module describes the functions of basic passive components and describes how to use them in simple circuits. This module also describes how to wire circuits together using a breadboard. The goal of this module is to enable students to design and implement the circuits they need to interact with basic sensors and actuators.
3 horas para completar
10 videos (Total 56 minutos), 3 lecturas, 2 cuestionarios
3 horas para completar
Module 2
This module introduces sensors and actuators and discusses how to interface with them. We’ll examine different classes of sensors and actuators. For each type of sensor/actuator, we’ll examine the circuitry needed to interface with it. Additionally, we’ll take a look at the Arduino code needed to communicate with the sensors and actuators.
3 horas para completar
10 videos (Total 57 minutos), 1 lectura, 2 cuestionarios
3 horas para completar
Module 3
This module introduces the use of software libraries with an Arduino sketch. One of the best aspects of the Arduino environment is that the use of good libraries allows a programmer to use complicated hardware without dealing with the complexity. The Arduino environment is supported by many libraries and this module examines the use of several of the more common libraries that allow the use of hardware peripherals in the microprocessor.
3 horas para completar
10 videos (Total 61 minutos), 1 lectura, 2 cuestionarios
3 horas para completar
Module 4
In this module we’ll examine Arduino shields and how they are used to extend the capabilities of an Arduino-based system. Shields are printed circuit boards that are stacked on top of the Arduino together with libraries that enable the new hardware to be used through an Arduino sketch. We’ll describe the benefits of shields and their basic construction as well as the use of libraries in interfacing with each shield.
3 horas para completar
10 videos (Total 60 minutos), 2 lecturas, 2 cuestionarios
Reseñas
Principales reseñas sobre INTERFACING WITH THE ARDUINO
por RC19 de ene. de 2017
The course was good enough to cover all the basic of interfacing with an arudino and the tutor has done a good job at helping with the basic as well. I would like to thankyou for this good course
por RA1 de nov. de 2019
Please include more programming assignments, i'd suggest to include miniature programming assignments and quizzes, after a few videos so the student can get used to programming within Arduino.
por RA22 de may. de 2020
A good introductional course, where i'm able to learn the basics and some more. A recommended course for anyone who is willing to learn more about arduino or start learning arduino.
por N10 de jul. de 2020
The course needs a lot more additional lectures to complete the programming assignments. So only someone with pre-acquired knowledge will be able to complete the assignments (code)
Acerca de Programa especializado: An Introduction to Programming the Internet of Things (IOT)
Design, create, and deploy a fun IoT device using Arduino and Raspberry Pi platforms.
Preguntas Frecuentes
¿Cuándo podré acceder a las lecciones y tareas?
¿Qué recibiré si me suscribo a este Programa especializado?
¿Hay ayuda económica disponible?
¿Tienes más preguntas? Visita el Centro de Ayuda al Alumno.
